Home > 3com Etherlink > 3com Etherlink Iii Isa Linux Driver

3com Etherlink Iii Isa Linux Driver

Don't do 1022 * it on EISA cards, it prevents the module from getting an 1023 * IRQ after unload+reload... */ 1024 outw(0x0f00, ioaddr + WN0_IRQ); 1025 } 1026 1027 return If you believe this post is offensive or violates the CNET Forums' Usage policies, you can report it below (this will not automatically remove the post). Ensure your BIOS is configured correctly to exclude resources used by the 3c509, especially IRQs, to avoid unpredictable behavior. The 1.2.13 driver may occasionally produce the following message: eth0: Missed interrupt, status then 2011 now 2000 Tx 00 Rx 8000. this content

Top Linux at CESDIS CESDIS is located at the NASA Goddard Space Flight Center in Greenbelt MD. Furthermore, the 3c509 should only be configured in EISA mode when installed in a computer that has actual EISA slots (and an EISA-aware BIOS). SEE ALSO altq(4), ed(4), el(4), ie(4), intro(4), ng_ether(4), sn(4), vx(4), ifconfig(8) STANDARDS are great. We update lp->stats below. */ 1212 outw(StatsDisable, ioaddr + EL3_CMD); 1213 1214 /* Disable the receiver and transmitter. */ 1215 outw(RxDisable, ioaddr + EL3_CMD); 1216 outw(TxDisable, ioaddr + EL3_CMD); 1217 1218

Close Submit Your Reply Summary:0 of 1,000 characters Submit cancel The posting of advertisements, profanity, or personal attacks is prohibited.Click here to review our site terms of use. Note that your submission may not appear immediately on our site. Once the download is complete, double-click the installation file and follow the instructions provided in order to update your drivers. 3Com 16-Bit ISA LAN Driver 3Com 16-Bit ISA Network Interface Card Please refer to our CNET Forums policies for details.

Top jrtex Posts: 8 Joined: 2005/08/15 11:10:41 Re: install 3Com 3C509B (Etherlink III ISA) in text mode?? Top mkoco Posts: 6 Joined: 2005/06/17 11:27:06 Contact: Contact mkoco Website install 3Com 3C509B (Etherlink III ISA) in text mode?? But I know this card will work on a win95 computer. Sorry but the details and any "do this" is not in these posts yet.As to that old CDROM drive, the interface was called MKE Panasonic (but since this is so long

Quote Postby K_Frye » 2005/11/21 21:30:14 Blacktiger wrote:Hi.Sorry to bring this up again, but he's right. Flag Permalink This was helpful (0) Collapse - I've been replacing such with ... I've got the same problem right now and don't know how to fix it.Maybe you have a pci 3c509 but the ISA 3c509 is not recognized.I'm not good in kernel recompiling additional hints Old 3c509 (not the *B* model) cards would sometimes set the 'adapter failure' bit for unknown reasons.

All rights reserved. ep0: strange connector type in EEPROM: assuming AUI The driver does not know what to do with the information the EEPROM has about connectors, so it is assuming the worst. Discussions cover Windows 2003 Server, Windows installation, adding and removing programs, driver problems, crashes, upgrading, and other OS-related questions.Real-Time ActivityMy Tracked DiscussionsFAQsPoliciesModerators General discussion 3Com EtherLink III ISA (3C509/3C509b) in ISA ep0: <%s> at port 0x%03x in EISA mode The 3C509 ISA card is in EISA mode.

Thanks to Terry Murphy, [email protected], and Cameron Spitzer, [email protected], of 3Com for providing the EtherLink III technical reference manuals. for the read to take place. 635 Some chips seem to require much longer */ 636 mdelay(2); 637 return inw(ioaddr + 12); 638 } 639 640 /* Read a word from Tested on Windows XP Professional SP2 with 3C509B-C (Combo AUI, Coax, RJ45) ISA: works fine! for the read to take place. */ 650 /* Some chips seem to require much longer */ 651 mdelay(4); 652 653 for (bit = 15; bit >= 0; bit--) 654 word

It most likely will also work on Windows NT4, Windows 2000 and Windows Server 2003. news Als when trying it that way I get a docbook error notice.So it seems very strange to me that sucht good distro as Centos does no network ISA support, why not? The flag "0x3c509" must be set to avoid conflicts with other card types when overriding the I/O address. Various models of these cards come with a different assortment of connectors: AUI/DIX Standard 15 pin connector, also known as 10base5 (thick-net) 10Base2 BNC, also known as thin-net 10BaseT UTP, also

Recent Discussion on 3Com Network / Ethernet Drivers Post New more... The syntax for LILO parameters is ether=10,0x310,3,0x3c509,eth0 This configures the first found 3c509 card for IRQ 10, base I/O 0x310, and transceiver #3 (10base2). ep0: unknown ID 0xXXXXXXXX The driver has found an ID that it believes it supports, but does not have a specific identification string to present to the user. http://windows8hacks.com/3com-etherlink/3com-etherlink-iii-drivers-xp.html They are supported by the sn(4) driver.

It would not work. Tx Carrier Errors Reported in /proc/net/dev If an EtherLink III appears to transmit packets, but the "Tx carrier errors" field in /proc/net/dev increments as quickly as the Tx packet count, you You didn't write one word if you were looking into setting the IRQ for your card or if you remembered the bad old days.Bob Flag Permalink This was helpful (0) Collapse

Disruptive posting: Flaming or offending other usersIllegal activities: Promote cracked software, or other illegal contentOffensive: Sexually explicit or offensive languageSpam: Advertisements or commercial links Submit report Cancel report Track this discussion

This should be rare or impossible in normal operation. Look for conflicts with other devices. some other device or device driver hogging the bus or disabling interrupts. One-line summary: (10 characters minimum)Count: 0 of 55 characters 3.

Quote Postby speedrider79 » 2005/07/15 08:12:34 Hi RHEL users,Question, I have a centOS4.1 system freshly installed.But not running with X offcourse!But the problem I have, how can I install my 3com This should never happen. There is so many to choose from. Powered by the Ubuntu Manpage Repository generator maintained by Dustin Kirkland © 2010 Canonical Ltd. http://windows8hacks.com/3com-etherlink/3com-etherlink-iii-driver-for-xp.html Cards with their tag set will not 227 respond to subsequent ID sequences. */ 228 229 outb(0x00, id_port); 230 outb(0x00, id_port); 231 for (i = 0; i < 255; i++) {

and the packet rounded to a doubleword. */ 741 outsl(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2); 742 743 if (inw(ioaddr + TX_FREE) > 1536) 744 netif_start_queue(dev); 745 else 746 The driver queried the hardware for what ethernet attachment were present, but the hardware reported none that the driver recognized. Rate this product: 2. Quote Postby mkoco » 2005/09/21 06:52:29 I wouldn't say it isn't supported, probably support is not compiled into kernel.

Flag Permalink This was helpful (0) Collapse - "Will a win95 computer talk to an XP computer over a LAN?" = by R. Close E-mail This Review E-mail this to: (Enter the e-mail address of the recipient) Add your own personal message:0 of 1,000 characters Submit cancel Thank You, ! Possible problems are a "green" mode enabled that slows the processor down when there is no keyboard activitiy. We should really wait 50ms...*/ 1252 outw(StartCoax, ioaddr + EL3_CMD); 1253 else if ((dev->if_port & 0x03) == 0) { /* 10baseT interface */ 1254 /* Combine secondary sw_info word (the adapter

I was sharing printers, drives, and internet connection across win95 and win98 computers. I excluded the step of setting up a new user account when using XP Pro because I thought that it didn't apply to XP Home.I guess the cable is ok but I guess at this stage it doesn't matter that the Network user is logged on and the Neigborhood Network displays the computer name and shared file. This message appears to be purely informational.

All other distro's do as far as I know, also Fedora and Suse.Can anybody help me please with this? Allows the boot-time parameter to override the EEPROM specified IRQ line. (I'm still reluctent to allow setting the I/O address with this method.) Always maps the card to the EEPROM location,

© Copyright 2017 windows8hacks.com. All rights reserved.